DC60D

ZKSJ 3-phase brushless DC Pump DC60D,Control for the soft start, no impact, start low consumption.

  • Impeller:
  • Max head:
  • Weight:
  • Rated voltage: 24Vdc,12Vdc
  • Max flow:
  • Dimension:
Close
Consulting
Customer service:86-755-27811557

一.Product features

1

Product name:

ZKSJ DC60D pump

2

Model

DC60D

3

Weight

0.89kg

4

Life span

≥30000h

5

Waterproof Grade

IP68

6

Color

Black

7

Certification

CE,ROSH

8

Material of pump shell

PPS+30%GF

9

Noise class

35dB

10

Leakproofness

0.8MPa8kg)

11

insulation grade

H Grade(180°)

12

Working Theory

Centrifugal Pump

13

Usage

  ECO car cooling system,

Circulating cooling system and so on

二.Range of application

1

Used liquid type

Oil, water, normal acid/alkaline liquids or other liquids

2

Used liquid temperature

-30-100(with built-in driver for non-submersible;

with external driver for submersible)

3

Speed regulation method

By PWM: amplitude 5V 50-800HZ

By 0-5V analog signal

By Potentiometer, resistor range 4.7K~20K

4

Used power

DC power supply, solar panel,batteries

三.Essential parameter (the parameter is able to be customized)

1

Specific model

DC60D-12100PWM

DC60D-12100VR

DC60D-12100S

 DC60D-   12100VS

DC60D-24120PWM

DC60D-24120VR

DC60D-24120S

DC60D-24120VS

DC60D-36120PWM

DC60D-36120VR

DC60D-36120S

 DC60D-   36120VS

PWM:PWM speed regulation(50-800HZ/ 5V)

VR:0~5V/potentiometer speed regulation

S:fixed speed,no change

2

Rated voltage

12V DC

24V DC

36V DC


3

Working voltage range

10-18V

10-30V

15-40V

In this voltage range,can work normally

4

Rated current

5.4A(6.6A)

4.5A(5A)

3A(3.3A)

Closed water outlet current (open pumping current)

5

Input power

65W(80W)

108W(120W)

108W(120W)

Closed  water outlet power (open pumping power)

6

Max flow rate

3200L/H

3800L/H

3800L/H

Flow rate without lifting height(horizontal flow rate)

7

Max. Head

10M

12M

12M

Static head

8

Min. Input current

12V-7A

24V-6A

36V-4A


四.Additional function instructions

1

K-Jam protection

When the pump is stuck, it will stop working

2

Water shortage/Dry run protection

When the pump is short of water or idling, the pump will cyclically stop (8 seconds) and run (2 seconds), and the protection strategy can be customized

3

Overloading protection

When the voltage is unstable or exceeds the rated power, the pump stops running.

4

Power reverse connection

wrong connection of the power supply(positive and negative), the water pump stops running, and then re-connected, can work normally.


 

Pump with built-in driver

 图片关键词

For external use


 

Pump with external driver

 图片关键词

Suitable for high temperature or corrosive solution submersible installation

Dimensions of pump


图片关键词


Characteristics of three-phase water pump

1.DC Low voltage safe and reliable

2.Three phase brushless sine wave control technology

3.Eliminate high-frequency electromagnetic noise, smooth and silent

4.The pump body and the drive can be separated and resistant to high temperature

5.Magnetic isolation design, leakage proof, waterproof grade IP68.

6.Acid, alkali and salt corrosion resistance, oil resistance, organic solvents and other liquid media (consult in advance)

7.Constant power can be customized (for example, 12V 80W water pump, Constant Power 80W with voltage varying between 12v-24v)

8.Constant speed can be customized (keep the speed unchanged when the load changes)

9.Accurate dry run protection and Jam protection based on current detection (programmable protection mechanism)

10.Soft start eliminates the peak voltage and reduces the starting current

11.Suitable for Music fountain and other high-frequency start- stop application

12.MPPT function can be customized for solar power supply to avoid poor startup when the light is weak.

13.The pump and pump control system can be customized for various application environment requirements